Joplin 2A3 DHT Push Pull Tube Amplifier DIY



The Joplin tube amplifier was a 2A3 or 45 based unit using 2 DHT power tubes per channel in push-pull configuration from Diy HiFi Supply. The unit featured a pre-amplifier stage and a volume control allowing it to be driven directly from a line level source negating the need for a separate pre-amplifier. I eventually rebuilt my unit to replace the pcb, making it all hardwired to create some space for larger Teflon caps. Below is the original build review in pdf format.

** I have included the circuits which would allow you to build this amp from scratch build as the kit is no longer available **

 

Joplin 2A3 DHT
Joplin 2A3 DHT